Covercraft Front End Masks (also called "Bras")

Covercraft Front End Masks (also called "Bras")

Front End Masks

Originally started in Germany, where Porsche covered the front of each car as it came off the production line prior to a shake-down run around their famous test track, masks have long been considered a necessity for any car owner wanting to protect the area of the car that takes the most abuse on the road - the front end, especially the leading edge of the hood and any painted areas around the grille.

 

 



Quality features you'll find in every Covercraft mask:

  • Protective air intake screens are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface.
  • Covered aluminum tabs allow adjustment at the fender wells as vinyl expands and contracts due to temperature.  Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature.
  • Reinforced air foils prevent flapping and lift.  Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks.
  • We use a micro-perforated finish on our vinyl.  It allows the mask to "breathe" and permits moisture vapor to evaporate when the vehicle is driven in wet weather.  Still, if a mask becomes wet and is going to be left sitting in the sun, we recommend it be removed to allow the backing to dry properly.
  • Our heavy-gauge leather grain vinyl has a soft, protective backing.  We use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask.
  • Seams are overlapped and finished with a strong, durable top stitch.  Edges are covered with soft, non-abrasive felt-rimmed bindings.

                   

Covercraft offers five (5) different styles of masks so you can choose the look and protection level you require.